When I was younger, I dreamed of owning a Tamiya radio-controlled car.
At the time they were far too expensive and technical for my pocket money, or engineering ability.
As I’ve gotten older, I’ve become more confident in my creative capabilities.
I also earn slightly more pocket money now than I used to when I was ten…
So, when I was able to cash in on some of my favorite childhood toys I took the opportunity to fulfill my Tamiya target!
As usual, I went to my local hobby shop, Cool Toys, who have a fantastic range of radio-controlled kits and ready-to-run vehicles.
After watching far too many YouTube videos I decided to get a Tamiya TT-02 kit, as it is very adaptable to different forms of bodies and on-road and off-road formats.
I must say I was still quite intimidated when I opened the box and was confronted with numerous bags of screws, multiple sprues of parts and an instruction manual the size of a novella.
The first part of the kit I made were the shock absorbers.
I had been tempted to get oil-filled performance shocks but decided to start off easily (and cheaply – Oil-filled shocks are over $100 for a set of four). They were also an easy part of the kit to build and give a sense of the kit’s construction being well under way.
(This wouldn’t ACTUALLY be the case until I started on the drivetrain.)
Gears, grease, screws and repeat, gears, grease, screws and repeat!
This is one of the parts of the build I feared stuffing up the most, as it appeared so fiddly.
As we know, however, appearances can be deceiving, and everything seemed to fit together without too much hassle, stress, blood or hair loss.
Next the motor went in (and out a couple times later on testing out the wheels), and the gear housings covered up all the greased-up bits.
The shocks I made up first off were no longer held in suspension (see what I did there?) as they were finally attached to the wheel assemblies on either end.
Universal joints and drive shafts will also provide power to all four corners of my RC beastie!
Giving the car some direction was next.
Steering set up was another rather intimidatingly technical bit, not least because I had heard and read several times about over-tightening screws de-threading softer plastic parts, so there was some added caution in this part of construction.
I think I got it all Goldilocks – I.e. not too loose, not too tight, JUST RIGHT!
On went the wheels (the smell of Tamiya rubber tyres has always been intoxicating!) and we were pretty much done! (after disassembling and reassembling half the bloody drive assembly because I unknowingly had the driveshaft and wheel bearings around the wrong way until trying, unsuccessfully, to fit the rims on..)
With the steering servo connected up It was time to give the chassis some cover and curves.
The kit I chose came with a 1998 Ford Escort shell.
The early 90s WRC Escort Cosworth was one of my favorite rally cars of all time. I made the scale model of the 1994 Cosworth RS many years ago, so this was an easy choice.
After buying the special curved polycarbonate scissors from Cool Toys I carefully cut around the exterior of the body shell to get it the right shape.
This body came with the wheel arches pre-cut, which made life easier, and the kit look smoother than my later work on the other body I bought.
After masking up the windows (also one of the more stressful parts of the build – you don’t want to get this far then ruin its appearance!) I sprayed the body (you spray the INSIDE of these models – the plastic body helps shield the finished paintwork) in four coats of Tamiya PS16 Metallic Blue giving it a similar color to the Subaru Impreza WRC rally car of the same era.
I managed to avoid any paint bleed under the masking and once that and the outer coating were peeled off and decals were added to the outside of the body the results were STUNNING!
I sprayed the windows in Tamiya PS31 Smoke to help hide the electronics inside the car.
One of the underlying reasons I chose the Escort and painted it in metallic blue is that my first long-term car (my very first car was a Ford Anglia that Dad and I partially restored in my last year of high school until it died of rear crossmember rust about a year later) was a metallic blue 1983 Ford Laser – kind of the Escort’s Mum/Dad.
It was an awesome, incredibly reliable car that served me really well, so I built this kit as a homage to that Laser.
I even used a label maker to recreate its number plate!
Is it a Bird? Is it a Plane? Not it’s V8 Supercar!
While scoping out my RC car purchase, I noted that Glen at Cool Toys had a Tamiya TT-02 Ford Mustang body shell and an after-market sticker sheet with the livery for Dick Johnson Racing modern Kiwi legend Scott McLaughlin‘s Australian V8 Supercar:
Despite being a fan of DJR arch-rivals Holden Racing Team from back in the Peter Brock and Mark Skaife days I couldn’t resist – I had to have a go at replicating the awesome looking DJR Mustang!
So, once I had completed the Escort, I moved onto the more complex task of cutting out, masking and painting (, and masking and painting, and masking and painting) Tamiya PS1 White, PS2 Red, PS6 Yellow and PS31 Smoke onto the Mustang to give it DJR’s iconic three-tone paint scheme.
With several coats, different colors, respraying, decalling and a few whoopsies I was finally able to make a realistic recreation that looked pretty bloody awesome if I do say so myself (just don’t look at the back of it..)!
Final Thoughts
Over-all this was a really easy, enjoyable experience with almost everything going right!
If anything the one big downside of the build is that I’m really annoyed at and disappointed in myself that my fear of inability kept me from building one of these kits a lot earlier in life!
(This is probably moot, though, as it wasn’t until recently that I had anywhere near the disposable income to afford making one.)
My Twitter friend Justin Ryan very kindly donated a hand controller and receiver he had spare to help get me going, so now I just have to get a nickel metal hydride battery, and I can start burning RC rubber!
